heimann-hamm.de: Chemicals and consumables for the manufacture of rotogravure cylinders

Cylinder preparation

Order No. Product Application/Property

Products for electrolytical degreasing bathes

A03-0106 Degreasing Salt EL Strong degreasing concentrate, based on phosphate.

A03-0136 Degreasing Salt SIL Very strong degreasing concentrate, based on alkali (phosphate free).

A03-0120 Degreasing Concentrate Stron-E Degreasing salt and decoater for Think-electroplating.

B09-0394 Degreasing Salt CTH Degreasing salt for Think-electroplating.

A03-0146 Degreasing Concentrate SIL (ABC) Liquid degreasing concentrates for electrolytical degreasing.

A03-0154 Degreasing Concentrate HKS Liquid degreasing concentrates for electrolytical degreasing very strong.

Manual degreasing

B09-0471 Pat.-Helio Degreasing and desoxidation paste for surface cleaning of gravure cylinders.

B09-0470 Helio VI Degreasing and desoxidation liquid for surface cleaning of gravure cylinders.

Separating solutions for ballard skin process

A03-0153 Separating Solution 2020/D-PG Silver based, dilution 1:20 with destilled water, longer lifetime

A03-0523 Separating Solution 2020/B Silver based, dilution 1:20 with destilled water, longer lifetime, customized concentration

A03-0139 Separating Solution 2000 Silver based, ammonia-free, dilution 1:20 with destilled water

A03-0134 Separating Powder E Separating powder E is a non-toxic and non-polluting concentrate based on albumin, dilution 50 g on 10 l destilled water. Coating manual or by spraying nozzles.

Covering Varnish

B03-0557 Covering Varnish, yellow For covering the cylinder edges during the galvanic copper-plating or chrome-plating.

Galvanic Nickel Bath

galvanic copper bath

Order No. Product Application/Property

Copper Anodes

B09-0564 Copper Nuggets Of-Cu Copper anodes with a high chemical purity more than 99,9 %, oxygen-free and phosphorus-free (Of-Cu) resp. With a content of phosphorus from 0,04 - 0,06 % (P-Cu) for sulphuric copper bathes, regular dissolution of copper with very low formation of mud.

B09-0562 Copper Nuggets P-Cu Copper anodes with a high chemical purity more than 99,9 %, oxygen-free and phosphorus-free (Of-Cu) resp. With a content of phosphorus from 0,04 - 0,06 % (P-Cu) for sulphuric copper bathes, regular dissolution of copper with very low formation of mud.

B09-0502 Copper Balls Of-Cu Copper anodes with a high chemical purity more than 99,9 %, oxygen-free and phosphorus-free (Of-Cu) resp. With a content of phosphorus from 0,04 - 0,06 % (P-Cu) for sulphuric copper bathes, regular dissolution of copper with very low formation of mud.

B09-0568 Copper Balls P-Cu Copper anodes with a high chemical purity more than 99,9 %, oxygen-free and phosphorus-free (Of-Cu) resp. With a content of phosphorus from 0,04 - 0,06 % (P-Cu) for sulphuric copper bathes, regular dissolution of copper with very low formation of mud.

B09-0594 Flat Copper Anodes P-Cu In various sizes.

M03-0001 ff. Carbon Brushes In various sizes.

B09-0508 DisCoP Non-dissolvable anodes for the DisCoP process.

General products for the galvanic copper bath

A03-0109 Copper Sulphate, snow shape Chloride-poor and extra pure product for sulphuric copper-electrolytes.

B09-0314 Sulphuric Acid 96 %, chemical pure Highly pure sulphuric acid for preparation of sulphuric copper-electrolytes.

A03-0133 Hardness Additive HE 10 Concentrate for deposition a ductile copper with a hardness of 200 - 220 HV; dilution 1:14 (resp. 1:9) with distilled water; chloride-free.

A03-0115 Hardness Additive HE 14 Concentrate for deposition a ductile copper with a hardness of 200 - 220 HV, dilution 1:14 (resp. 1:9) with distilled water, chloride-free.

A03-0164 Hardness Additive HE14-S Concentrate for deposition a ductile copper with a hardness of 200 - 220 HV; dilution 1:14 (resp. 1:9) with distilled water; chloride-free. HE14-S is also useful for higher current densities.

A03-0132 Hardness Additive HE 10/EW Concentrate for deposition a bright, ductile copper with a hardness of 200 - 220 HV, dilution 1:9 (resp. 1:14) with distilled water, as well suitable for phosphorus-containing copper anodes.

A03-0159 Hardness Additive HE 14/EW Concentrate for deposition a bright, ductile copper with a hardness of 200 - 220 HV, dilution 1:9 (resp. 1:14) with distilled water, as well suitable for phosphorus-containing copper anodes.

A03-0138 Hardness Additive Powder HD 10 Powdery concentrate for deposition of a bright, ductile copper with a hardness of 200 ? 220 HV, dilution 350 g in 10 l distilled water.

B09-8046 Silver Oxide Correction material for precipitation of chloride.

Galvanic Chrome Bath

Order No. Product Application/Property

B09-0504 ff. Platinised Titanium Anodes Insoluble mesh anodes for chrome baths with a long life-time, in customized sizes.

B09-0587 Chromic Acid Crystalline Salt for set-up of hard chrome baths, high-grade chemical purity of 99,75 %.

B09-0603 PrintChrome H-A Chromic acid solution with catalyst; Batch solution

B09-0588 PrintChrome H-D Chromic acid solution with catalyst; Dosing solution

B09-0605 PrintChrome Catalyst H-C Fast chrome-plating additive for a better current yield; results in lower chrome plating time and lower current consumption (also available: chromic acid solution with catalyst)

B09-0607 Defoam Cr-H Surfactant solution for reduction of bath fumes in the chrome bath; low foaming; high chemical and thermal stability; electrolyte losses are reduced.

B09-0606 Additive PrintChrome CONVERSION H-TCC Additive for platinized titanium anodes (at conversion of lead anodes); reduction of crome³⁺ formation

B09-0229 Barium Carbonate Correction agent for precipitating of sulphate.

Dechroming

Order No. Product Application/Property

Dechroming Solutions

A03-0100 HNL Ready-for-use solutions for activated or purely chemical dechroming. Dechroming is accelerated by additives and corrosion of copper is avoided. HNL and Acecor 15567 are solutions based on hydrochloric acid for chemical dechroming, 84 H is a solution based on sulphuric acid for electrolytically activated dechroming.

A03-0101 84 H Ready-for-use solutions for activated or purely chemical dechroming. Dechroming is accelerated by additives and corrosion of copper is avoided. HNL and Acecor 15567 are solutions based on hydrochloric acid for chemical dechroming, 84 H is a solution based on sulphuric acid for electrolytically activated dechroming.

Dechroming concentrates

A03-0099L 84 HK Concentrates for self-production of dechroming solutions by adding acids. Dechroming is accelerated and corrosion of copper is avoided. Acecor 15702 is a concentrate for chemical dechroming with hydrochloric acid or for activated dechroming with sulphuric acid, 84 HK, KEHK and HA are concentrates for electrolytically activated dechroming with sulphuric acid, Acecor 11654 is a concentrate for purely chemical dechroming with hydrochloric acid.

A03-0103 ff. KEHK and HA Concentrates for self-production of dechroming solutions by adding acids. Dechroming is accelerated and corrosion of copper is avoided. Acecor 15702 is a concentrate for chemical dechroming with hydrochloric acid or for activated dechroming with sulphuric acid, 84 HK, KEHK and HA are concentrates for electrolytically activated dechroming with sulphuric acid, Acecor 11654 is a concentrate for purely chemical dechroming with hydrochloric acid.

M52-M11654 Acecor 11654 Concentrates for self-production of dechroming solutions by adding acids. Dechroming is accelerated and corrosion of copper is avoided. Acecor 15702 is a concentrate for chemical dechroming with hydrochloric acid or for activated dechroming with sulphuric acid, 84 HK, KEHK and HA are concentrates for electrolytically activated dechroming with sulphuric acid, Acecor 11654 is a concentrate for purely chemical dechroming with hydrochloric acid.

Dechroming Salt

A03-0105 Dechroming Salt Composition of solid matters for self-production of a dechroming solution based on hydrochloric acid for chemical dechroming.

Chemicals for etching methods

Order No. Product Application/Property

B09-0212 Ferric Chloride, normal 45 °Bé Ferric chloride solution with a density of 45 °Bé for etching of the cylinders copper coating.

B09-0213 SW One-bath Ferric Chloride. FH 48 °Bé One-bath etching solution (density 48 °Bé) on ferric chloride basis with additives for constant etching of the cylinders copper coating.

B09-0216 Ferric Chloride 45 °Bé with side wall protection Ferric chloride solution with a density of 45 °Bé and side wall protection additive for equal etching.

B09-8002 Cupric Chloride Dihydrate Product for etching of the copper cylinder according to the Think-process.

B03-0541 Laser Lacquer black Lacquer for rotogravure cylinder production according laser burning technique.

B03-0590 Laser Lacquer H-B 212 For copper

B01-0593 Laser Lacquer H-BYC 200 For steel

B03-0542 Thinner for Laser Lacquer

B01-0191 Thinner for Laser Lacquer H-B 212 and H-BYC 200

A03-0498 Laser-Activator Cleaning and activation of the copper surface after direct lasering.

B09-0175 Acid-proof Copying Layer HR 100/NS Set for copy-technical etching in copper by a negative film; hardening by UV light; the layers are acid-proof; removal of not hardened areas with developer.

B09-0169 Thinner HR Set for copy-technical etching in copper by a negative film, hardening by UV light, the layers are acid-proof, removal of not hardened areas with developer.

B09-0172 Developer HR Set for copy-technical etching in copper by a negative film, hardening by UV light, the layers are acid-proof, removal of not hardened areas with developer.

B07-0057 White Shrink Iron Roller cover for etching machines.

C03-0030 Tampon made of Styrofoam With round edges.

Milling off and turning off copper

Filter Material for Galvanic Bathes

Grinding and Polishing

Order No. Product Application/Property

B04-0014 ff. Steel Grinding Stones Available with various grains for grinding of steel surface, Height: 50 mm, Grain: 120, 280, 400

B04-0001 ff. Copper Grinding Stones Available with various grains for rough grinding and fine grinding resp. polishing of the copper surface. The abrasive grains are embedded into a solid plastic mass, due to the self-cleaning effect subsequent treatment is not necessary, Diameter: 195 mm, Height: 50 mm oder 70 mm, Bore hole diam.: 50 mm or 100 mm, Grain: 120, 150, 180, 280, 400, 600, 800, 1000, 1500, 2000, 2500, 3000, 5000

B04-0027 ff. Hand Grinding Stones for Copper Available with various grains, Size: 245 x 124 x 50 mm.

B04-0053 Chrome Grinding Stones For fine grinding resp. polishing of the chrome surface. The abrasive grains are embedded into a solid plastic mass, due to the self-cleaning effect subsequent treatment is not necessary, Chromstar, Grain 800

B04-0101 ff. Zinc Grinding Stones Diameter: 200 mm, Height: 50 mm, Bore hole diameter: 50 mm, Grain: 1000, 2000, 3000

B02-0153 Melting Glue Granulate Special melting glue for sticking of the grinding stones onto the grinding plate.

Finishing Tapes

B01-5001 ff. Microfinishingfilm 262L or 272L Flexible, water-proof plastic tapes coated with abrasives (aluminium oxide), for polishing of chrome or pre-grinding of copper before grinding with stones, Grain size: 9, 15, 20, 30, 40, 50, 60, 80, 100 µm, Width: 100 mm or 200 mm Length: 50 m

B01-5012 ff. Imperial Lappingfilm 261X Flexible, water-proof plastic tapes coated with abrasives (aluminium oxide), for polishing of chrome resp. copper or other metal surfaces, generate a very smooth surface. Grain size: 3, 5, 9, 12, 30 µm, Width: 101,6 mm or 203,2 mm Length: 45,72 m

B01-5004 ff. Imperial Lappingfilm 261X Flexible, water-proof plastic tapes coated with abrasives (aluminium oxide), for polishing of chrome resp. copper or other metal surfaces, generate a very smooth surface. Sheets: 215 x 279 mm

B04-5012 ff. Lappingfilm Grinding tapes for metals, Grain: 800, 1000, 1500, Width: 100 mm or 200 mm Length: 50 m

B01-5020 ff. CR-Finishingfilm 5900, 5902, 5910 Grinding tapes for metals, Grain size: 9, 12, 20, 30, 40, 50 µm Width: 100 mm or 200 mm, Length: 50 m

B01-5090 ff. Diamond Lappingfilm 661X Flexible, water-proof plastic tapes coated with abrasives (diamond), for polishing of anilox rolls, Grain size: 1, 1,5, 3, 6, 9, 15, 30 µm, Width: 50,8 or 101,6 mm Length: 15,2 m

Grinding Paper

B04-0691 ff. Grinding Paper Siawat FC 1727 Water-proof grinding paper with abrasives (silicon carbide) in various grains, 230 x 280 mm

B04-0605 ff. Grinding Paper Siawat 1913 Water-proof grinding paper with abrasives (corundum) in various grains, 230 x 280 mm

B04-0200 ff. Economic Reel 611 P, Length 50 m For surface treatment, available in various grains (80 to 220), water-proof, Width: 40 mm and 50 mm

B04-0401 ff. Grinding Paper Sianor 1600 Grinding paper in various grains, 230 x 280 mm

B04-2200 ff. Grinding Paper 991 A or C, water-proof Water-proof grinding paper in various grains, 230 x 280 mm

B04-2251 Grinding Wheel SC/DH, Ø = 178 mm, blue For automatic grinding of the cylinder edges

B04-0693 Handpads Scotch Brite Hand grinding pads 158 x 224 mm

B04-2000 Grinding Paper MIC grey 15 µm Size: 215,9 x 279 mm

Further articles

Order No. Product Application/Property

B01-0019 Acid-proof Gloves For handling of corrosive electrolyte solutions.

B01-0010 Working Gloves Made of leather.

B01-0151 ff. Rubber Squeezer Available in customized measurements.

B03-0700 ff. Measuring Cup Made of polypropylen in various sizes (1, 2, 3 l).

B03-0545 Contact Grease Cu20 For electroplating department.

B03-0047 ff. Copper Tape KF 181 In customized measurements.

B03-0022 ff. Copper Brushes Size: 69 × 40 × 0,8 mm, further measurements available

B01-0397 ff. Glass fibre brushes Length 200 mm, in various diameters

B03-0815 Files For subsequent polishing, in various finesses

C03-0603 ff. Rubber Printing Blanket For proof-presses in various sizes.

Magnifier

B01-0184 ff. Linen Tester Magnification: 5x, 6x, 8x, 10x, 12x

B07-0409 ff. Folding Magnifier Magnification: 6x, 8x, 10x, 12x, 15x, 20x

B07-0400 ff. Eye Clamped Magnifier Magnification: 6x, 10x

B07-0404 ff. Pocket Microscope In various types and magnifications.

Analysis

on request Analysis Test Kit for copper bath electrolytes For determination of sulphuric acid and copper sulphate.

on request Analysis Test Kit for chrome bath electrolytes For determination of sulphuric acid and chromic acid.

C01-0269 Hull Cell Case Set for checking electrolyte solutions.

B01-0163 ff. Bottles for solution samples Made out of PE in differnet sizes.

B07-0803 Areometer 0 - 30 °Bé For determination of electrolyte solution density.

B07-0800 Areometer 0 - 50 °Bé For determination of electrolyte solution density.

B07-0900 Areometer 1,000 - 1,200 g/cm³ For determination of electrolyte solution density.

Cleaning Chemicals

A03-0575 Cleaning Concentrate UBIX Cleaning Concentrate for ultrasonic bathes for cleaning of ESA bars

B03-0912 Paint Remover HO Cleaning of machine parts (removing of ink rests like correction lacquer or toluene based ink)

B05-0352 Cold Cleaner H/L Special detergent for removing of oil, fat and not aged printing ink from surfaces (machines, gravure cylinders, floors)

A03-0567 Cleaning Concentrate UB/L Special detergent for use with ultrasonic bathes for removing of printing ink (water-based ink) from gravure cylinders

A03-0573 Cleaning Concentrate TU Special detergent for use with small ultrasonic bathes for removal of oil, fat and not aged printing ink from small parts

B09-0581 Cleaning Powder Cleaning powder for use with cylinder cleaning machines, based on baking powder

B01-0049 ff. Cleaning Clothes In various types and sizes.

Header - Tiefdruck Chemikalien und Verbrauchsmaterialien GB

Chemicals and Consumables for the manufacture of rotogravure cylinders

Häufige Suchbegriffe die auf unsere Seite gestellt werden: