Formherstellung Messgeräte GB

Heimann<br />Measuring devices

Roughness Tester PS10

Produkslider Rauigkeitsmessgerät PS10 GB

Roughness Tester PS10
Roughness Tester PS10
Order No.: C01-0364

Absolute Mobility – with Roughness Tester PS1

With increasing manufacturing and machine quality, the quality of technical product’s surface finishes is becoming ever more important.

This makes it all the more crucial to offer metrological solutions with instrument designs that provide quick and simple yet standards-compliant measuring options. In some cases measurements are transferred from the inspection room to production to save time and money. Components may be too large or heavy to be transported, leaving no alternative but to carry out measurements directly on the component or machine.

  • Error-free operation thanks to an integrated, removable roughness standard.
  • Automatic cutoff selection (patented) so that even non-specialists are ensured correct 
  •  31 parameters offer the same range of functions as a laboratory instrument.
  • Data is saved in the device, e.g. TXT, X3P, CSV and PDF file.


The Roughness Tester PS10-set contains


  • PS10 base unit
  • Drive unit (removable)
  • 1 standard pick-up (conforming to standards)
  • built-in battery
  • Roughness standard integrated (removable) into base unit incl. calibration certificate
  • Pick-up protection
  • Charger / mains adapter with 3 mains power adapters
  • Operating instructions
  • Carrying case with shoulder strap
  • USB cable
  • Extension cable drive unit
  • Height adjustment accessory (integrated)


Technical Data (subject to technical modifications)
Measuring range:
350 µm/180 µm/90 µm (changes automatically)
Inductive skidded pick-up, 2 μm (80 μin) stylus tip, measuring force approx. 0.7 mN
Unit of measurement:
Metric, inch
Traversing length Lt*:
1.75 mm, 5.6 mm, 17.5 mm; automatic (0.069 in, 0.22 in, 0.69 in)
Traversing length (acc. to MOTIF):
1 mm, 2 mm, 4 mm, 8 mm, 12 mm, 16 mm (0.040 in, 0.080 in, 0.160 in, 0.320 in, 0.480 in, 0.640 in)
Cut off acc. to ISO/JIS:
0.25 mm, 0.8 mm, 2.5 mm; automatic (0.010 in, 0.030 in, 0.100 in)
Short cut off acc. to ISO/JIS:
Filter acc. to ISO/JIS:
Phase-correct profile filter (Gaussian filter) acc. to DIN EN ISO 11562, special filter acc. to DIN EN ISO 13565-1, ls filter acc. to DIN EN ISO 3274 (can be disabled)
Parameters 25 (with tolerance limits):
Ra, Rq, Rz equiv. to Ry (JIS), Rz (JIS), Rmax, Rp, Rp (ASME), Rpm (ASME), Rpk, Rk, Rsk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr equiv. to tp (JIS, ASME), RSm, R, Ar, Rx
14 including 3 Asian languages
Memory capacity:
Max. 15 profiles, max. 20,000 results
Calibration function:
Other functions:
Blocking of settings (code-protected), date/time